Latest DEA-5TT2 Exam Dumps EMC Exam from Training Expert It-Tests [Q22-Q41] – IT Certification Exam Questions & Answers

Rate this post

Latest DEA-5TT2 Exam Dumps EMC Exam from Training Expert It-Tests

Pass EMC Associate – Networking Exam PDF Dumps | Recently Updated 62 Questions

EMC DEA-5TT2 (Associate – Networking) Certification Exam is an industry-recognized certification that is highly valued by employers. Associate – Networking Exam certification is designed to validate the skills and knowledge of individuals who work with EMC networking products and solutions. It is an excellent way for individuals to demonstrate their expertise in networking and to differentiate themselves from their peers in the job market.

Q22. A network administrator wants to use a subnet that will only have two host addresses. Which subnet mask meets this requirement?

255.255.255.248

255.255.255.252

255.255.255.254

255.255.255.256

Q23. Which route type is added to the routing table by a routing protocol?

Directly connected

Static

Default route

Dynamic

Q24. What is the Organizationally Unique Identifier (OUI) in the MAC address 00:C4:4F:23:AF:4A?

00:C4:4F

00:C4:4F:23

23:AF:4A

4F:23:AF:4A

Q25. Which fields are mandatory TLVs in a LLDP PDU frame?

System Capabilities and Management Address

Chassis ID, Port ID, and Time-to-Live

IP Address, Default Gateway, and DNS

Port Description, System Name, and System Description

Q26. A Dell EMC Networking N-Series switch is configured on a port channel with LACP using the interfaces Te1/0/1 and Te1/0/2. How is the egress traffic distributed among the interfaces?

Traffic overflow will be sent to the second interface

Interfaces will be used in active/passive

Load balanced per packet using round robin

Load balanced using a hash function

Q27. A network administrator is troubleshooting an OSPF routing issue. There are two paths to a destination network from one switch. In addition, one path is comprised of four 1 Gb links. The other path is comprised of two 1 Gb and two 100 Mb links. The administrator ran several trace routes and notices that the packets are swapping back and forth between the two paths.
Which corrective action must be taken on the switch infrastructure to correct this issue?

Manually specify the OSPF Router ID on each switch within the path.

Break the paths into multiple OSPF areas.

Change the reference speed used by OSPF in cost calculations on all switches within the path.

Switch all routing protocols to RIPv2.

Q28. Which Ethernet frame forwarding method works best when the outbound ports run at the same speed as the inbound port?

Store-and-forward

Fragment-free

Unicast

Cut-through

Q29. Refer to the exhibit.

Switch A and Switch B are connected to each other. Both switches use interfaces Gi1/0/1 and Gi1/0/2. Switch A has a Spanning Tree priority of 8192 and Switch B has the default priority. Which interface becomes the root port?

Switch A Gi1/0/1

Switch A Gi1/0/2

Switch B Gi1/0/1

Switch B Gi1/0/2

Q30. What is the correct sequence of steps that occur in the communications between the client and server to obtain an IP address from a DHCP server?

Q31. What accurately describes IPv6 addressing?

IPv6 addresses are denoted by eight groups of four hexadecimal numbers.

IPv6 uses 128 hexadecimal numbers instead of the 32 hexadecimal numbers used by IPv4.

IPv6 is used to converse IP addresses and utilize private addresses.

IPv6 uses broadcast addresses for neighbor discovery.

Q32. What accurately describes the Network Time Protocol (NTP)?

Implemented on a Dell EMC Network OS 6.

Time synchronization algorithms do not account for clock drift.

Client synchronizes among a set of distributed time servers.

Client makes sudden changes in time to keep synchronized.

Q33. What accurately describes OSPF?

Interior gateway link-state protocol

Exterior gateway distance-vector protocol

Interior gateway distance-vector protocol

Interior gateway path-vector protocol

Q34. What is the aggregated lanes’ maximum speed rating for a QSFP28 transceiver?

4 Gbps

40 Gbps

112 Gbps

128 Gbps

Q35. Which port and protocol is used by NTP to communicate?

TCP port 123 for both the source and destination

TCP port 123 for the source and TCP port 80 for the destination

UDP port 123 for both the source and destination

UDP port 123 for the source and TCP port 80 for the destination

Q36. Which flags are used in the TCP header to initiate and end TCP connections or sessions?

Initiate = Acknowledge (ACK) End = Synchronize (SYN)

Initiate = Acknowledge (ACK) End = Finish (FIN)

Initiate = Synchronize (SYN) End = Finish (FIN)

Initiate = Finish (FIN) End = Synchronize (SYN)

Q37. Which topology is considered a best practice when stacking switches?

Ring

Cascade

Serial

Daisy-chain

Q38. Which formula is used for calculating OSPF interface costs?

Reference bandwidth – interface bandwidth

Reference bandwidth / interface bandwidth

Reference bandwidth + interface bandwidth

Interface bandwidth / reference bandwidth

Q39. When configuring a switch, which CLI mode only supports limited show commands?

EXEC

Maintenance

Configuration

EXEC Privilege

Q40. Which option is used to configure Network Address Translation (NAT) to provide one-to-one mapping between local and global addresses?

Outside source static

Overload

Inside source static

PAT

Q41. Which message is sent by a router when TTL expires?

Echo request

Time exceeded

Destination unreachable

Echo reply

Loading …

Updated Test Engine to Practice DEA-5TT2 Dumps & Practice Exam: https://www.it-tests.com/DEA-5TT2.html

Tags: DEA-5TT2 exam flashcards, DEA-5TT2 exam guide materials, DEA-5TT2 reliable exam collection materials, DEA-5TT2 reliable exam questions and answers, DEA-5TT2 reliable test dumps file, DEA-5TT2 valid learning materials, DEA-5TT2 valid test lab questions, new DEA-5TT2 test prep

IT Certification Exam Questions & Answers

Leave a Reply Cancel reply