[2023] Earn Quick And Easy Success With NSE7_EFW-6.4 Dumps [Q16-Q32] – IT Certification Exam Questions & Answers

Rate this post

[2023] Earn Quick And Easy Success With NSE7_EFW-6.4 Dumps

Free NSE7_EFW-6.4 pdf Files With Updated and Accurate Dumps Training

How much Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 – Enterprise Firewall 6.4 Exam Cost

The Fortinet NSE7_EFQ-6.4: Fortinet NSE 7 – Enterprise Firewall 6.4 Exam Costs USD 400. As the exam costs may vary country or region vise, it is always recommended to check the official website to see what’s the cost of the exam for your country. The total cost for preparing for the exam will include study materials as well as NSE7 EFW-6.4 exam dumps and NSE7 EFW-6.4 practice exams. Refer to the official website by clicking here for more info on pricing.

NO.16 View the exhibit, which contains a session entry, and then answer the question below.

Which statement is correct regarding this session?

It is an ICMP session from 10.1.10.10 to 10.200.1.1.

It is an ICMP session from 10.1.10.10 to 10.200.5.1.

It is a TCP session in ESTABLISHED state from 10.1.10.10 to 10.200.5.1.

It is a TCP session in CLOSE_WAIT state from 10.1.10.10 to 10.200.1.1.

NO.17 In which two states is a given session categorized as ephemeral? (Choose two.)

A UDP session with packets sent and received.

A TCP session waiting for FIN ACK.

A UDP session with only one packet received.

A TCP session waiting to complete the three-way handshake.

NO.18 Examine the output of the ‘get router info ospf neighbor’ command shown in the exhibit; then answer the question below.

Which statements are true regarding the output in the exhibit? (Choose two.)

The interface ToRemote is OSPF network type point-to-point.

The OSPF router with the ID 0.0.0.2 is the designated router for the ToRemote network.

The local FortiGate is the backup designated router for the wan1 network.

The OSPF routers with the IDs 0.0.0.69 and 0.0.0.117 are both designated routers for the wan1 network.

https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html

NO.19 Examine the following partial outputs from two routing debug commands; then answer the question below:

Why the default route using port2 is not displayed in the output of the second command?

It has a lower priority than the default route using port1.

It has a higher priority than the default route using port1.

It has a higher distance than the default route using port1.

It is disabled in the FortiGate configuration.

http://kb.fortinet.com/kb/viewContent.do?externalId=FD32103

NO.20 Refer to exhibit, which contains the output of a BGP debug command.

Which statement explains why the state of the 10.200.3.1 peer is Connect?

The local router is receiving BGP keepalives from the remote peer, but the local peer has not received the OpenConfirm yet.

The TCP session to 10.200.3.1 has not completed the three-way handshake.

The local router is receiving the BGP keepalives from the peer, but it has not received a BGP prefix yet.

The local router has received the BGP prefixes from the remote peer.

BGP neighbor states and how they change: * Idle: Initial state * Connect: Waiting for a successful three-way TCP connection * Active: Unable to establish the TCP session * OpenSent: Waiting for an OPEN message from the peer * OpenConfirm: Waiting for the keepalive message from the peer * Established: Peers have successfully exchanged OPEN and keepalive messages

NO.21 View the exhibit, which contains the partial output of a diagnose command, and then answer the question below.

Based on the output, which of the following statements is correct?

Anti-reply is enabled.

DPD is disabled.

Quick mode selectors are disabled.

Remote gateway IP is 10.200.5.1.

NO.22 A FortiGate has two default routes:

All Internet traffic is currently using port1. The exhibit shows partial information for one sample session of Internet traffic from an internal user:

What would happen with the traffic matching the above session if the priority on the first default route (IDd1) were changed from 5 to 20?

Session would remain in the session table and its traffic would keep using port1 as the outgoing interface.

Session would remain in the session table and its traffic would start using port2 as the outgoing interface.

Session would be deleted, so the client would need to start a new session.

Session would remain in the session table and its traffic would be shared between port1 and port2.

NO.23 An administrator has configured a FortiGate device with two VDOMs: root and internal. The administrator has also created and inter-VDOM link that connects both VDOMs. The objective is to have each VDOM advertise some routes to the other VDOM via OSPF through the inter-VDOM link. What OSPF configuration settings must match in both VDOMs to have the OSPF adjacency successfully forming? (Choose three.)

Router ID.

OSPF interface area.

OSPF interface cost.

OSPF interface MTU.

Interface subnet mask.

NO.24 Which two tasks are automated using the Install Wizard on FortiManager? (Choose two.)

Installing configuration changes to managed devices

Importing interface mappings from managed devices

Adding devices to FortiManager

Previewing pending configuration changes for managed devices

NO.25 What conditions are required for two FortiGate devices to form an OSPF adjacency? (Choose three.)

IP addressesare in the same subnet.

Hello and dead intervals match.

OSPF IP MTUs match.

OSPF peer IDs match.

OSPF costs match.

Explanation
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-advanced-routing-54/Routing_OSPF/OSPF_Bac

NO.26 Examine the output of the ‘get router info ospf neighbor’ command shown in the exhibit; then answer the question below.

Which statements are true regarding the output in the exhibit? (Choose two.)
Refer to the exhibit, which shows the output of a debug command.
Which statement about the output is true?

TheOSPF routers with the IDs 0.0.0.69 and 0.0.0.117 are both designated routers for the war. l network.

The OSPF router with the ID 0.0.0.2 is the designated router for the ToRemote network.

The local FortiGate is the designated router for the wan1 network.

The interface ToRemote is a point-to-point OSPF network.

https://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/13685-13.html

NO.27 View the exhibit, which contains a session entry, and then answer the question below.

Which statement is correct regarding this session?

It is an ICMP session from 10.1.10.10 to 10.200.1.1.

It is an ICMP session from 10.1.10.10 to 10.200.5.1.

It is a TCP session in ESTABLISHED state from 10.1.10.10 to 10.200.5.1.

It is a TCP session in CLOSE_WAIT state from 10.1.10.10 to 10.200.1.1.

NO.28 Examine the following partial output from two system debug commands; then answer the question below.

Which of the following statements are true regarding the above outputs? (Choose two.)

The unit is running a 32-bit FortiOS

The unit is in kernel conserve mode

The Cached value is always the Active value plus the Inactive value

Kernel indirectly accesses the low memory (LowTotal) through memory paging

NO.29 An administrator has configured two FortiGate devices for an HA cluster. While testing HA failover, the administrator notices that some of the switches in the network continue to send traffic to the former primary device. The administrator decides to enable the setting link-failed-signal to fix the problem.
Which statement about this setting is true?

It sends an ARP packet to all connected devices, indicating that the HA virtual MAC address is reachable through a new master after a failover.

It sends a link failed signal to all connected devices.

It disabled all the non-heartbeat interfaces in all HA members for two seconds after a failover.

It forces the former primary device to shut down all its non-heartbeat interfaces for one second, while the failover occurs.

NO.30 An administrator has configured the following CLI script on FortiManager, which failed to apply any changes to the managed device after being executed.

Why didn’t the script make any changes to the managed device?

Commands that start with the # sign are not executed.

CLI scripts will add objects only if they are referenced by policies.

Incomplete commands are ignored in CLI scripts.

Static routes can only be added using TCL scripts.

https://help.fortinet.com/fmgr/50hlp/56/5-6-2/FortiManager_Admin_Guide/1000_Device%20Manager/2400_Scripts/1000_Script%20samples/0200_CLI%20scripts+.htm#Error_Messages A sequence of FortiGate CLI commands, as you would type them at the command line. A comment line starts with the number sign (#). A comment line will not be executed.

NO.31 What does the dirty flag mean in aFortiGate session?

Traffic has been blocked by the antivirus inspection.

The next packet must be re-evaluated against the firewall policies.

The session must be removed from the former primary unit after an HA failover.

Traffic has been identified as from an application that is not allowed.

Explanation
https://kb.fortinet.com/kb/viewContent.do?externalId=FD40119&sliceId=1

NO.32 The CLI command set intelligent-mode <enable | disable> controls the IPS engine’s adaptivescanning behavior. Which of the following statements describes IPS adaptive scanning?

Determines the optimal number of IPS engines required based on system load.

Downloads signatures on demand from FDS based on scanning requirements.

Determines when it is secure enough to stop scanning session traffic.

Choose a matching algorithm based on available memory and the type of inspection being performed.

Explanation
Configuring IPS intelligenceStarting with FortiOS 5.2,intelligent-mode is a new adaptive detection method. This command is enabled the default and it means that the IPS engine will perform adaptive scanning so that, for some traffic, the FortiGate can quickly finish scanning and offload the traffic to NPU orkernel. It is a balanced method which could cover all known exploits. When disabled, the IPS engine scans every single byte.
config ips globalset intelligent-mode {enable|disable}

Loading …

The Fortinet NSE7_EFW-6.4 Certification Exam is designed to test the knowledge and skills of IT professionals on the latest Enterprise Firewall 6.4 technology. This certification is aimed at professionals who work with Fortinet solutions and want to validate their skills. The certification exam is a vendor-neutral exam, which means that it is not tied to any specific products or technologies.

Real Updated NSE7_EFW-6.4 Questions Pass Your Exam Easily: https://www.it-tests.com/NSE7_EFW-6.4.html