[Dec-2023] Oracle 1z0-1091-22 Exam Practice Test Questions – It-Tests [Q14-Q28] – IT Certification Exam Questions & Answers

Rate this post

[Dec-2023] Oracle 1z0-1091-22 Exam Practice Test Questions – It-Tests

Updated Certification Exam 1z0-1091-22 Dumps – Practice Test Questions

To earn the Oracle 1z0-1091-22 certification, candidates must pass a single exam that consists of 60 multiple-choice questions. 1z0-1091-22 exam is timed and lasts for 105 minutes. The passing score for the exam is 60%. Candidates who pass the exam will receive a certificate from Oracle that demonstrates their expertise in implementing Oracle Utilities Meter Solution Cloud Service 2022. Oracle Utilities Meter Solution Cloud Service 2022 Implementation Professional certification can help professionals to enhance their career prospects and demonstrate their commitment to ongoing professional development.

NEW QUESTION 14
What are the THREE uses of the Smart Grid Gateway (SGG)?

Sharing event information with downstream systems

Sharing customer information

Connecting to Smart Meter systems

Communicating directly with meters

Sharing outage information with outage management systems

NEW QUESTION 15
Which THREE are derived values?

Value with a factor such as line loss applied.

Value converted from one unit of measurement to another.

Estimated value if the final measurement is too low or high.

Interval data values created by “intervalizing” a scalar reading by applying a profile to it.

Comparison of normal versus actual usage.

NEW QUESTION 16
From where is the final measurement condition code created?

Post-VEE condition code

Raw condition code

Pre-VEE condition code

Condition code sent from head-end system (HES)

NEW QUESTION 17
Which THREE are best practices for measurement retention?

Derive time-of-use (TOU) values with interval data to prevent storing extra data.

Derive demand from interval data to prevent storing extra data.

Keep scalar measurements in the customer read tables to stay consistent.

Use Information Lifecycle Management (ILM) processes to help archive data.

Keep initial measurement data (IMD) for the same period of time as final measurements for cancel rebill purposes.

Explanation
Some of the best practices for measurement retention are:
* Derive time-of-use (TOU) values with interval data to prevent storing extra data: Time-of-use (TOU) values are scalar values that are calculated from interval data based on different TOU periods. Interval data is measurement data that is recorded at regular intervals, such as every 15 minutes or every hour.
To prevent storing extra data, you can derive TOU values with interval data instead of storing them separately.
* Derive demand from interval data to prevent storing extra data: Demand is a value that indicates the maximum power or load that is consumed or generated during a certain period. Demand can be calculated from interval data by using certain methods, such as block demand or rolling demand. To prevent storing extra data, you can derive demand from interval data instead of storing them separately.
* Use Information Lifecycle Management (ILM) processes to help archive data: Information Lifecycle Management (ILM) processes are features that enable MDM to manage the lifecycle of measurement data based on certain policies or rules. ILM processes can help archive data that is no longer needed or used by moving them to different storage tiers or deleting them.
You do not need to keep scalar measurements in the customer read tables to stay consistent, which are tables that store measurement data that is entered by customers or meter readers. Scalar measurements are measurement data that are recorded at certain events, such as billing cycle end or meter exchange. You can store scalar measurements in different tables based on their source or status.
You do not need to keep initial measurement data (IMD) for the same period of time as final measurements for cancel rebill purposes, which are records that store the raw measurement data that is received from smart meter systems or other sources. Final measurements are records that store the measurement data that has been validated, edited, and estimated. You can keep IMD for a shorter period of time than final measurements based on your business needs or requirements.

NEW QUESTION 18
When used with the SaaS Cloud services, the Oracle Smart Grid Gateway (SGG) adapters process usage and device event payloads via batch processing. Files are sent from a head-end system (HES) to an Oracle Cloud Object Storage location, where they are batch processed.
Which THREE operations are performed by the SGG processes?

Parse payload into individual usage readings/device events.

Invoke IMD/Device Event Seeder (as appropriate).

Transform usage readings into standard (unified) format.

Load reads into Object Storage.

Load reads into a file directory.

NEW QUESTION 19
Your client requests you to design and set up data necessary to support an electric meter that is installed at a customer’s service point with solar panels:
* Channel 1: Measures the kWh that was consumed from the grid. This is an interval channel that measures in
60-minute intervals.
* Channel 2: Measures the kWh that was generated. This is an interval channel that measures in 60-minute intervals.
Using the Math usage rule, you must create usage transactions that take the difference between the consumed and generated channels, store and name the difference value, and store the derived curve.
Which THREE statements are true?

The two channels need distinct service quantity identifiers (SQIs) to differentiate between the generated and consumed kWh.

Net consumption SQI is required.

You must set “Save Derived Vector” to Yes in the Math usage rule.

Net consumption SQI is not required because the result is stored in the database.

A separate generated service point is required

NEW QUESTION 20
Which TWO functions can the service point-measurement cycle relationship of Meter Data Management (MDM) perform?

Initiate request of bill determinants from subscribing systems.

Initiate push of bill determinants ta subscribing systems.

Create optimal meter reader routes by measurement cycle.

Create hand-held download read activities.

NEW QUESTION 21
The interval proxy day estimation Validation, Estimation, and Editing (VEE) rule estimates missing intervals by selecting interval data to average from a list of days that are most like the day being estimated. This is achieved by measuring the component comparison periods.
What is used to define the proxy?

Like premise

Weather data

Neighbor

Customer class profile

NEW QUESTION 22
A small building with five metered apartments has common areas used by all residents. The common areas are metered separately, and the common usage needs to be spread evenly across residents.
How should you configure the solution to bill each resident accurately?

Each apartment’s usage subscriptions must have two service paints, one for the apartment and one for
20% of the common areas.

Set up a virtual meter to include the apartment usage and 20% of the common areas.

Calculate the usage for each apartment by using customer information system (CIS).

Use a derivation algorithm to include 20% of the common areas with the apartment accounts.

NEW QUESTION 23
How do you configure the derived values that are relevant for a device?

Configure the derived values an the final measurement type for the measuring components to be defined on the device.

Configure the derived values on the device type for the derived values to be defined on the device.

Configure the derived values on the measuring component type for the measuring components to be defined on the device.

Configure the derived values on the measuring component for the measuring components to be defined on the device.

NEW QUESTION 24
A time-of-use (TOU) template’s interval size controls the values allowed as start and end times. A template can be used to generate TOU data for TOU maps whose seconds per interval (SPI) is divisible by the template’s SPI.
For what can you use a 60-minute template?

To only generate TOU data for 30-minute TOU maps.

To generate TOU data for 6G-, 15-, and 5-minute TOU maps.

To generate TOU data for 120-minute TOU maps.

To only generate TOU data for minute TOU maps.

To generate TOU data for 120-minute and 1440-minute TOU maps.

NEW QUESTION 25
A customer is starting an Advanced Meter Infrastructure (AMI) roll-out initiative and they plan to replace their legacy scalar time-of-use (TOU) meters with smart meters. They want customer information system (CIS) to continue to bill for the same TOU periods and they do not want to change the CIS rates.
In which THREE ways can you configure Meter Data Management (MDM) to support this requirement?

Write a custom algorithm to determine the proper rate.

Add an extendable lookup value containing the new device configuration type and the new usage calculation group.

Add the TOU mapping rule to the existing usage calculation group.

Add a new usage calculation group with a TOU mapping rule.

Set up the new usage calculation group to be identified dynamically by plug-in logic supplied on the usage subscription’s type.

NEW QUESTION 26
You want to manage additional Landis + Gyr device events that are not covered by the set of standard device event types provided with Smart Grid Gateway (SGG).
Apart from creating the new device event type “admin data”, what else should you do to represent the new standard device events that you want to manage?

Set up service providers for each new device event that you want to manage, and specify on each service provider the standard device evert to which it maps.

Create a set of admin data to represent the Landis + Gyr specific device event types, ensuring that for each new device event type, the name of the corresponding standard device event business object is configured in the “Standard Device Event BO Map” characteristic.

Add a record into the External Device Event Mapping table (Dl-E>ODVCEVNTMAP) for each new device event that you want to manage, specifying the standard device event to which it maps.

Extend the Landis + Gyr device event mapping extendable lookup such that it maps each of the Landis
-f- Gyr specific device event names to the new standard device event names.

NEW QUESTION 27
Which THREE commands are supported by the Smart Grid Gateway (SGG) adapters?

Request outage information

On-demand reading

Ping meter

Connect

Disconnect service at pole

NEW QUESTION 28
Dynamic aggregation uses dynamic queries for aggregation processes. These dynamic queries are based on the configuration of administrative data.
Which THREE statements are true about the dynamic aggregation main components?

Measuring Component Sets define the dimensions and criteria by which aggregation is performed.

Aggregation Ordering Sets define the ordering of a series of related aggregations and the schedule of aggregation.

Measuring Components, also known as aggregator MCs, represent “buckets” or unique combinations of dimension values.

Aggregation Measuring Component Types define the most important properties of aggregation measuring components used for storing aggregated data.

Data sources store project-provided SQL for getting data.

Oracle 1z0-1091-22 exam consists of multiple-choice questions that evaluate the candidate’s knowledge and skills in implementing and configuring Oracle Utilities Meter Solution Cloud Service 2022. 1z0-1091-22 exam covers topics such as Oracle Utilities Meter Solution Cloud Service 2022 architecture, installation and configuration, security, integration, and deployment. 1z0-1091-22 exam is designed to test the candidate’s ability to apply their knowledge and skills to real-world scenarios.

Updated Verified 1z0-1091-22 dumps Q&As – Pass Guarantee or Full Refund: https://www.it-tests.com/1z0-1091-22.html