IT Certification Exam Questions & Answers

NO.24 A customer needs a server memory subsystem that meets the following requirements:
approaches the speed of traditional DRAM
ensures high capacity, high performance, and ongoing data safety in case of a power failure Which HPE memory feature meets the customer needs?

NO.25 A customer is facing high and unpredictable latency on an HPE ProLiant DL380 Gen10 server equipped with P408i-a controller Which tool can display an Array Diagnostic Report?

NO.26 Read the question, and then refer to the exhibit.
<Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP> An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.
The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.
What must you do to resolve this issue?

NO.27 A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.
Which HPE management offering meets the customer’s needs?

NO.28 When should you choose to populate a server with LRDlMMs?

NO.29 Why is SNMPv2c considered to be insecure?

NO.30 A customer is experiencing read cache hit ratios well below 80 percent on an HPE Nimble HF40 array Data is constantly being ejected from the Nimble array’s First In First Out cache What should you recommend?

NO.31 A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?

NO.32 You are installing a DL385 GEN10 LFF server at a customer site. The customer has a P8i6i-a RAID controller in the host After installing the provided 8 LFF disks in the front drive Days, you realize that the order also included two more SFF drives for the OS to boot from, but there are no SFF drive slots in the server, because it shipped from the factory.
Which action must be performed to finish the installation?

NO.33 Match each ProLiant solution to its ideal use case

NO.34 Refer to the exhibit.
Drag the correct protocols from the left to the appropriate area on the topology on the right.

NO.35 A customer’s environment includes virtual machines and containers. They need an on-premises platform that allows them to easily and efficiently deploy cloud-native applications at rack-scale.
Which HPE solution meets the customer requirements?

NO.36 A local state college is implementing a new VDI cluster to support computer and testing labs. They have the following requirements:
Three VMware ESXi Hosts, each with one AMD processor, 1 TB of RAM, 16 Gbps FC Dual Port HBA.
HPE Nimble AF20 with 17 TB usable capacity.
Integration into an existing HPE FlexFabric 5710 and HPE SN3000B Fibre Channel SAN switches.
The solution must fit in 7U of rack space. If the customer needs more capacity in the future, they will use scale-out growth.
Which server model should you recommend to this client?

NO.37 You are discussing storage types with a customer that is configuring their NAS solution. The company’s application developers use user-generated media and image files.
For which type of data should this customer use file storage?

NO.38 You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration Drag the steps on the left Into their appropriate order in the answer area on the right.

NO.39 A customer needs to deploy an application on a newly-installed HPE ProLiant server, but they report that the server is not online. They call you for remote support. The IP address on the production network cannot be reached. You are evaluating the probable root causes of this issue.
According to the troubleshooting methodology, what are next two steps? (Select two)

NO.40 A customer purchased a Nimble HF20 a year ago They are experiencing an issue with a few of their VMware servers in the RTP Nimble date center and asked that you make a recommendation based on the data in infoSight.
What should you recommend’?

NO.41 A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select two.)

NO.42 Match the characteristic to the correct HPE ProLiant family.

NO.43 A customer is subject to regulatory requirements and their data is highly sensitive.
Which HPE Smart Array feature addresses their need for an level of security for data stored inside their server?

NO.44 You need to change BIOS configuration settings without rebooting a server.
Which system utility should you use?

NO.45 You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

NO.46 Which feature in a block storage array eliminates redundant data through the process of using indexes that refer to the original set of data?