Pass Fortinet FCP_FGT_AD-7.6 exam questions – convert Test Engine to PDF [Q26-Q50] – IT Certification Exam Questions & Answers

Rate this post

Pass Fortinet FCP_FGT_AD-7.6 exam questions – convert Test Engine to PDF

Pass Your FCP_FGT_AD-7.6 Exam Easily – Real FCP_FGT_AD-7.6 Practice Dump Updated Jul 17, 2026

Fortinet FCP_FGT_AD-7.6 Exam Syllabus Topics:

Topic	Details
Topic 1	Deployment and system configuration: This section of the exam measures the skills of network security engineers and covers essential tasks for setting up a FortiGate device in a production environment. Candidates are expected to perform the initial configuration, establish basic connectivity, and integrate the device within the Fortinet Security Fabric. They must also be able to configure a FortiGate Cluster Protocol (FGCP) high availability setup and troubleshoot resource and connectivity issues to ensure system readiness and network uptime.
Topic 2	VPN: This section of the exam measures the skills of network security engineers and covers the configuration and deployment of Virtual Private Network (VPN) solutions. Candidates are required to implement SSL VPNs to grant secure remote access to internal resources and configure IPsec VPNs in either meshed or partially redundant topologies to ensure encrypted communication between distributed network locations.
Topic 3	Routing: This section of the exam measures the skills of firewall administrators and covers the configuration of routing features on FortiGate devices. It includes defining and applying static routes for directing traffic within and outside the network, as well as setting up Software-Defined WAN (SD-WAN) to distribute and balance traffic loads across multiple WAN connections efficiently.
Topic 4	Firewall policies and authentication: This section of the exam measures the skills of firewall administrators and covers the implementation and management of security policies. It involves configuring basic and advanced firewall rules, applying Source NAT (SNAT) and Destination NAT (DNAT) options, and enforcing various firewall authentication methods. The section also includes deploying and configuring Fortinet Single Sign-On (FSSO) to streamline user access across the network.
Topic 5	Content inspection: This section of the exam measures the skills of network security engineers and covers the setup and management of content inspection features on FortiGate. Candidates must demonstrate an understanding of encrypted traffic inspection using digital certificates, identify and apply FortiGate inspection modes, and configure web filtering policies. The ability to implement application control for monitoring and regulating network application usage, configure antivirus profiles to detect and block malware, and set up Intrusion Prevention Systems (IPS) to shield the network from threats and vulnerabilities is also assessed.

Q26. An administrator notices that some users are unable to establish SSL VPN connections, while others can connect without any issues.
What should the administrator check first?

Ensure that the affected users are using the correct port number.

Ensure that user traffic is hitting the firewall policy.

Ensure that forced tunneling is enabled to reroute all traffic through the SSL VPN

Ensure that the HTTPS service is enabled on SSL VPN tunnel interface

Q27. Which three statements about SD-WAN performance SLAs are true? (Choose three.)

They rely on session loss and jitter.

They can be measured actively or passively.

They are applied in a SD-WAN rule lowest cost strategy.

They monitor the state of the FortiGate device.

All the SLAtargets can be configured.

Q28. An administrator configures FortiGuard servers as DNS servers on FortiGate using default settings.
What is true about the DNS connection to a FortiGuard server?

It uses DNS over TLS.

It uses DNS over HTTPS.

It uses UDP 8888.

It uses UDP 53.

Q29. Refer to the exhibit. A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up, but phase 2 fails to come up.

Based on the phase 2 configuration shown in the exhibit, which two configuration changes will bring phase 2 up? (Choose two.)

On BR1-FGT, set Seconds to 43200.

On HQ-NGFW, enable Diffie-Hellman Group 2.

On BR1-FGT, set Remote Address to 10.0.11.0/255.255.255.0.

On HQ-NGFW. set Encryption to AES256.

Q30. You are encountering connectivity problems caused by intermediate devices blocking IPsec traffic.
In which two ways can you effectively resolve the problem? (Choose two.)

You should use the protocol IKEv2.

You can use SSL VPN tunnel mode to prevent problems with blocked ESP and UDP ports (500 or
4500).

You can configure a hub-and-spoke topology with SSL VPN tunnels to bypass blocked UDP ports.

You can turn on fragmentation to fix large certificate negotiation problems.

Q31. FortiGate is integrated with FortiAnalyzer and FortiManager.
When creating a firewall policy, which attribute must an administrator include to enhance functionality and enable log recording on FortiAnalyzer and FortiManager?

Policy ID

Log ID

Universally Unique Identifier

Sequence ID

Q32. Refer to the exhibit, which shows a routing table.

An administrator wants to create a new static route so the traffic to the subnet 172.20.1.0/24 is routed through port2 only.
What are the two criteria that the administrator can use to achieve this objective? (Choose two.)

The new static route must have the distance set to 9.

The existing static route through port3 must have the distance set to 11.

The new static route must have the priority set to 3.

The new static route must have the metric set to 1.

Q33. Refer to the exhibits.

The exhibits show the system performance output and default configuration of high memory usage thresholds on a FortiGate device.
Based on the system performance output, what are the two possible outcomes? (Choose two.)

FortiGate has entered conserve mode.

Administrators can access FortiGate only through the console port.

Administrators can change the configuration.

FortiGate drops new sessions.

Q34. Refer to the exhibits. An administrator configured the Web Filter Profile to block access to all social networking sites except Facebook. However, when users try to access Facebook.com, they are redirected to a FortiGuard web filtering block page.
Based on the exhibits, which configuration change must the administrator make to allow Facebook while blocking all other social networking sites?

Change the Feature set of Web Filter Profile as Proxy-based.

Set the Action as Exempt for www.facebook.com
in the Static URL Filter.

Change the type as Simple in the Static URL Filter section.

Set the Social Networking action as warning in the FortiGuard Category Based Filter.

Q35. Refer to the exhibit. The predefined deep-inspection and custom-deep-inspection profiles exclude some web categories from SSL inspection, as shown in the exhibit.
For which two reasons are these web categories exempted? (Choose two.)

The FortiGate temporary certificate denies the browser’s access to websites that use HTTP Strict Transport Security.

These websites are in an allowlist of reputable domain names maintained by FortiGuard.

The resources utilization is optimized because these websites are in the trusted domain list on FortiGate.

The legal regulation aims to prioritize user privacy and protect sensitive information for these websites.

Q36. Refer to the exhibit.

An administrator has created a new firewall address to use as the destination for a static route.
Why is the administrator not able to select the new address in the Destination field of the new static route?

In the new static route, the administrator must select Named Address.

In the new firewall address, the FQDN address must first beresolved.

In the new static route, the administrator must first set the interface to port2.

In the new firewall address, Routing configuration must be enabled.

Q37. Refer to the exhibit.

FortiGate has two separate firewall policies for Sales and Engineering to access the same web server with the same security profiles.
Which action must the administrator perform to consolidate the two policies into one?

Create an Aggregate interface that includes port1 and port2 to create a single firewall policy.

Select port1 and port2 subnets in a single firewall policy.

Replace port1 and port2 with the any interface in a single firewall policy.

Enable Multiple Interface Policies to select port1 and port2 in the same firewall policy.

Q38. Refer to the exhibit.

Based on this partial configuration, what are the two possible outcomes when FortiGate enters conserve mode? (Choose two.)

Administrators cannot change the configuration.

FortiGate skips quarantine actions.

Administrators must restart FortiGate to allow new session.

FortiGate drops new sessions requiring inspection.

Q39. Refer to the exhibit, which contains a RADIUS server configuration.

An administrator added a configuration for a new RADIUS server. While configuring, the administrator enabled Include in every user group.
What is the impact of enabling Include in every user group in a RADIUS configuration?

This option places the RADIUS server, and all users who can authenticate against that server, into every FortiGate user group.

This option places the RADIUS server, and all users who can authenticate against that server, into every RADIUS group.

This option places all users into every RADIUS user group, including groups that are used for the LDAP server on FortiGate.

This option places all FortiGate users and groups required to authenticate into the RADIUS server, which, in this case, is FortiAuthenticator.

Q40. Which two statements describe characteristics of automation stitches? (Choose two.)

Actions involve only devices included in the Security Fabric.

An automation stitch can have multiple triggers.

Multiple actions can run in parallel.

Triggers can involve external connectors.

Q41. You have configured an application control profile, set peer-to-peer traffic to Block under the Categories tab, and applied it to the firewall policy. However, your peer-to-peer traffic on known ports is passing through the FortiGate without being blocked. What FortiGate settings should you check to resolve this issue?

FortiGuard category ratings

Application and Filter Overrides

Network Protocol Enforcement

Replacement Messages for UDP-based Applications

Q42. Refer to the exhibit. Why did the FortiGate device drop the packet?

It matched the default implicit firewall policy.

It matched an explicitly configured firewall policy with the action DENY.

It cannot reach the next-hop IP.

It failed the RPF check.

Q43. Which three strategies are valid SD-WAN rule strategies for member selection? (Choose three.)

Lowest Cost (SLA) without load balancing

Manual with load balancing

Lowest Quality (SLA) with load balancing

Lowest Cost (SLA) with load balancing

Best Quality with load balancing

Q44. Which three statements about SD-WAN performance SLAs are true? (Choose three.)

They rely on session loss and jitter.

They can be measured actively or passively.

They are applied in a SD-WAN rule lowest cost strategy.

They monitor the state of the FortiGate device.

All the SLAtargets can be configured.

Q45. A FortiGate administrator is required to reduce the attack surface on the SSL VPN portal.
Which SSL timer can you use to mitigate a denial of service (DoS) attack?

SSL VPN http-request-header-timeout

SSL VPN dtls-hello-timeout

SSL VPN login-timeout

SSL VPN idle-timeout

Q46. Refer to the exhibit, which shows a partial configuration from the remote authentication server.

Why does the FortiGate administrator need this configuration?

To set up a RADIUS server Secret.

To authenticate Any FortiGate user groups.

To authenticate and match the Training OU on the RADIUS server.

To authenticate only the Training user group.

Q47. Refer to the exhibit.

An administrator has configured an Application Overrides for the ABC.Com application signature and set the Action to Allow. This application control profile is then applied to a firewall policy that is scanning all outbound traffic. Logging is enabled in the firewall policy. To test the configuration, the administrator accessed the ABC.Com web site several times.
Why are there no logs generated under security logs for ABC.Com?

The ABC.Com Type is set as Application instead of Filter.

The ABC.Com is configured under application profile, which must be configured as a web filter profile.

The ABC.Com Action is set to Allow.

The ABC.Com is hitting the category Excessive-Bandwidth.

Q48. Refer to the exhibit. Which two statements about the FortiGuard connection are true? (Choose two.)

FortiGate is using the default port for FortiGuard communication.

FortiGate identified the FortiGuard Server using DNS lookup.

The weight increases as the number of failed packets rises.

You can configure unreliable protocols to communicate with FortiGuard Server.

Q49. FortiGate is integrated with FortiAnalyzer and FortiManager.
When creating a firewall policy, which attribute must an administrator include to enhance functionality and enable log recording on FortiAnalyzer and FortiManager?

Policy ID

Log ID

Universally Unique Identifier

Sequence ID

Q50. Which two settings are required for SSL VPN to function between two FortiGate devices?
(Choose two.)

The server FortiGate requires a CA certificate to verify the client FortiGate certificate.

The client FortiGate requires a manually added route to remote subnets.

The client FortiGate requires a client certificate signed by the CA on the server FortiGate.

The client FortiGate requires the SSL VPN tunnel interface type to connect SSL VPN.