IT Certification Exam Questions & Answers

NO.32 You are the NACE Inspector on a tank lining project where a 50% solids epoxy tank lining is being applied. After application of the 19 coat you notice small blisters in some areas of the applied lining.
Your FIRST preferred course of action is to:

NO.33 ISO SA 2 is defined as:

NO.34 Which of these tests uses a syringe?

NO.35 Check abrasive blast pressure with a

NO.36 Removal of welds splatter is required:

NO.37 How many gauge readings does SSPC-PA 2 require within a 4 cm (1.5 inch) diameter circle?

NO.38 On a blast-cleaned surface, Ian ultraviolet light is generally used to detect

NO.39 You are the NACE Inspector on a job where ISO ST 3 has been specified. The Contractor normally works to SSPC standards and been referencing SSPC SP 3.
Could this have any impact on the final surface preparation appearance?

NO.40 Inspection documentation is important because:

NO.41 Daily reports are important because:
Select All That Apply

NO.42 Fine cracks in the surface of a coating that rarely reach the substrate are called

NO.43 Upon arrival of coating materials, the inspector should

NO.44 Owners hire NACE Inspectors’ with the expectation that:

NO.45 When holiday testing is required the Inspector is always required to enforce NACE SP 0188:

NO.46 If a contractor is using a poorly maintained compressor to supply air for abrasive blast cleaning and conventional airspray, the coating inspector should perform a

NO.47 To be of value the Inspector’s documentation must be:

NO.48 Good records can provide maintenance departments with detailed information about ALL of the following EXCEPT