[Sep-2025] JN0-683 Exam Dumps Pass with Updated 2025 Data Center, Professional (JNCIP-DC) [Q10-Q30] – IT Certification Exam Questions & Answers

Rate this post

[Sep-2025] JN0-683 Exam Dumps Pass with Updated 2025 Data Center, Professional (JNCIP-DC)

Free JN0-683 Exam Dumps to Pass Exam Easily

NEW QUESTION 10
Exhibit.

You want to enable the border leaf device to send Type 5 routes of local networks to the border leaf device in another data center. What must be changed to the configuration shown in the exhibit to satisfy this requirement?

Move vrf-target target: 65000:1 to the evpn hierarchy.

Add a VLAN configuration with an 13-interface to the tenant1 routing instance.

Add encapsulation vxlan to the evpn hierarchy.

Change: 5001 in the route-distinguisher to : 10010.

NEW QUESTION 11
Exhibit.

The exhibit shows the truncated output of the show evpn database command.
Given this output, which two statements are correct about the host with MAC address 40:00:dc:01:00:04?
(Choose two.)

The host is assigned IP address 10.4.4.5.

The host is originating from irb.300.

The host is located on VN110002.

The host is originating from an ESI LAG.

NEW QUESTION 12
What are three actions available tor MAC move limiting? (Choose three.)

drop

filter

enable

log

shutdown

NEW QUESTION 13
Why is a designated forwarder required in a multihomed CE-to-PE VXLAN environmentusing EVPN signalling?

The designated forwarder is required to prevent packets from looping between the PEs.

The designated forwarder is required to prevent flooding of MAC addresses to multihomed hosts.

The designated forwarder is required to prevent a traffic storm from being received on multihomed hosts.

The designated forwarder is required to prevent duplicate packets from being received on multihomed hosts.

NEW QUESTION 14
You are asked to implement VXLAN group-based policies (GBPs) in your data center. Which two statements are correct in (his scenario? (Choose two.)

VXLAN GBP uses scalable group tags thatmust be configured statically on each switch and activated through 802.1X.

VXLAN GBP uses scalable group tags that may be configured on a RADIUS server and pushed to the switch through 802.1X.

VXLAN GBP ensures consistent application of security group policies throughout the network.

VXLAN GBP ensures consistent application of BGP groups throughout the network.

NEW QUESTION 15
Exhibit.

Referring to the configuration shown in the exhibit, assume that there is no external router present, and that the configuration is fabric-only.
Which two statements are true about the example configuration? (Choose two.)

VNI 10006is assigned to vlan 800 (irb.800).

Devices in irb.400 (vlan 400) are not able to communicate directly with devices in routing instance Customer A.

Devices in routing instance Customer A are able to communicate with devices in routing instance Customer B

Devices in irb.400 (vlan 400) and irb.800 (vlan 800) are able to communicate over the fabric.

NEW QUESTION 16
Which two statements are true about IP fabrics using unnumbered BGP? (Choose two.)

Unnumbered BGP requires that family inet6 is configured on each interface.

Unnumbered BGP peering automatically provisions IPv6 peering.

Unnumbered BGP requires that family inet is configured on each interface.

Unnumbered BGP peering automatically provisions IPv4 peering.

NEW QUESTION 17
You are designing an IP fabric tor a large data center, and you are concerned about growth and scalability.
Which two actions would you take to address these concerns? (Choose two.)

Design a five-stage Clos IP fabric.

Design a three-stage Clos IP fabric.

Use EX4300 Series devices as the spine devices.

Use OFX5700 Series devices as the super spines.

NEW QUESTION 18
Exhibit.

Given the configuration shown in the exhibit, why has the next hop remained the same for the EVPN routes advertised to the peer 203.0.113.2?

EVPN routes cannot have the next hop changed.

The export policy is incorrectly configured.

The vrf-export parameter must be applied.

The vpn-apply-export parameter must be applied to this peer.

NEW QUESTION 19
In your EVPN-VXAN environment, you want to prevent a multihomed server from receiving multiple copies ofBUM traffic in active/active scenarios. Which EVPN route type would satisfy this requirement?

Type 8

Type 7

Type 4

Type 5

NEW QUESTION 20
You are asked to deploy 100 QFX Series devices using ZTP Each OFX5120 requires a different configuration. In this scenario, what are two components that you would configure on the DHCP server?
(Choose two.)

the IP address of the FTP server

the MAC address for each OFX5120

the MAC address of the FTP server

the management IP address for each OFX5120

NEW QUESTION 21
Exhibit.

Referring tothe exhibit, which statement is correct?

VNI 100 is not configured on the remote VTEP.

The MAC address is unknown and not in the forwarding table of the remote VTEP.

The remote VTEP is not responding.

The MAC address is known but not reachable by the remote VTEP

NEW QUESTION 22
You are deploying a Clos IP fabric with an oversubscription ratio of 3:1.
In this scenario, which two statements are correct? (Choose two.)

The oversubscription ratio remains the same when you remove spine devices.

The oversubscription ratio decreases when you add spine devices.

The oversubscription ratio increases when you remove spine devices.

The oversubscription ratio remains the same when you add spine devices.

NEW QUESTION 23
Exhibit.

You have implemented an EVPN-VXLAN data center. Device served must be able to communicate with device server2.
Referring to the exhibit, which two statements are correct? (Choose two.)

An IRB interface must be configured on spine1and spine2.

Traffic from server1 to server2 will transit a VXLAN tunnel to spinel or spine2. then a VXLAN tunnel from spinel or spine2 to Ieaf2.

An IRB Interface must be configured on leaf1 and Ieaf2.

Traffic from server! to server2 will transit the VXLAN tunnel between leaf1 and Ieaf2.

NEW QUESTION 24
You are deploying an EVPN-VXLAN overlay. You must ensure that Layer 3 routing happens on the spine devices. In this scenario, which deployment architecture should you use?

ERB

CRB

bridged overlay

distributed symmetric routing

NEW QUESTION 25
Exhibit.

Referring to the exhibit, Host1 (10.1.1.1) is failing to communicate with Host2 (10.1.2.1) in a data center that uses an ERB architecture. What do you determine from the output?

The traffic is failing because load balancing is not configured correctly.

The traffic is entering the VXLAN tunnel.

Host1 and Host2 are directly connected to leaf1.

The irb.20 interface is not configured on leaf1.

NEW QUESTION 26
Exhibit.

The exhibit shows the truncated output of the show evpn database command.
Given this output, which two statements are correct about the host with MAC address 40:00:dc:01:00:04?
(Choose two.)

The host is assigned IP address 10.4.4.5.

The host is originating from irb.300.

The host is located on VN110002.

The host is originating from an ESI LAG.

NEW QUESTION 27
Exhibit.

You are deploying a VXLAN overlay with EVPN as the control plane in an ERB architecture.
Referring to the exhibit, which three statements are correct about where the VXLAN gateways will be placed?
(Choose three.)

Only the spine devices will have L2 VXLAN gateways.

All leaf devices will have L2 VXLAN gateways.

All leaf devices will have L3 VXLAN gateways.

Only the border and leaf devices will have L3 VXLAN gateways.

Spine devices will have no VXLAN gateways.

NEW QUESTION 28
Exhibit.

A VXLAN tunnel has been created between leaf1 and Ieaf2 in your data center. Referring to the exhibit, which statement is correct?

Traffic sent from server1 to server2 will be dropped on Ieaf2.

Traffic sent from server1 to server2 will be tagged with VLAN ID 100 on Ieaf2 and forwarded to server2.

Traffic sent from server1 to server2 will be tagged with VLAN ID 200 on Ieaf2 and forwarded to server2.

Traffic sent from server1 to server2 will be dropped on leaf1.

NEW QUESTION 29
You are asked to build redundant gateways in your EVPN-VXLAN environment, but you must conserve address space because these gateways must span across seven PES. What should you implement on the PEs lo satisfy these requirements?

Use IRB interfaces with the same IP address and different MAC addresses.

Use IRB interfaces with the same IP and VGA.

Use IRB interfaces with the same IP and MAC address.

Use IRB interfaces with different IP addresses and the same VGA.

NEW QUESTION 30
Exhibit.

Referring to the exhibit, Host1 (10.1.1.1) is failing to communicate with Host2 (10.1.2.1) in a data center that uses an ERB architecture. What do you determine from the output?

The traffic is failing because load balancing is not configured correctly.

The traffic is entering the VXLAN tunnel.

Host1 and Host2 are directly connected to leaf1.

The irb.20 interface is not configured on leaf1.

Juniper JN0-683 Exam Syllabus Topics:

Topic	Details
Topic 1	Data Center Multitenancy and Security: This section tests knowledge of single-tenant and multitenant data center setups. Candidates such as Data Center Professionals are evaluated on ensuring tenant traffic isolation at both Layer 2 and Layer 3 levels in shared infrastructure environments.
Topic 2	EVPN-VXLAN Signaling: This section assesses an understanding of Ethernet VPN (EVPN) concepts, including route types, multicast handling, and Multiprotocol BGP (MBGP). It also covers EVPN architectures like CRB and ERB, MAC learning, and symmetric routing.
Topic 3	Data Center Deployment and Management: This section assesses the expertise of data center networking professionals like architects and engineers, focusing on key deployment concepts. Topics include Zero-touch provisioning (ZTP), which automates device setup in data centers without manual input.
Topic 4	Data Center Interconnect: For Data Center Engineers, this part focuses on interconnecting data centers, covering Layer 2 and Layer 3 stretching, stitching fabrics together, and using EVPN-signaled VXLAN for seamless communication between data centers.
Topic 5	VXLAN: This part requires knowledge of VXLAN, particularly how the control plane manages communication between devices, while the data plane handles traffic flow. Demonstrate knowledge of how to configure, Monitor, or Troubleshoot VXLAN.