Pass Your Oracle 1Z0-1048-21 Exam with Correct 85 Questions and Answers [Q40-Q58] – IT Certification Exam Questions & Answers

Rate this post

Pass Your Oracle 1Z0-1048-21 Exam with Correct 85 Questions and Answers

Latest [Oct 20, 2022] 2022 Realistic Verified 1Z0-1048-21 Dumps

NEW QUESTION 40
Some users are complaining that the Time and Labor system is allowing them to record time againstprojects in which they are not team members. Further, the time type column name is project name, whereas the values are project numbers.
What should you do to correct this issue?

Create a new layout set with the “Enable Project Team membership” optionselected. Edit the time card layouts for the new layout set, delete the “Project Number” row, create a new row, select “Project Name”, and then assign to the appropriate time entry profile.

Edit the existing layout set and select the “Enable Project Team membership” option from the drop-down list. Create a new time card layout from scratch and select the “Project Name” check box.

Create a new layout set with the “Enable Project Team membership” option selected. Because the time type selected cannot be changed, you change the column name to “Project Number” so that it is consistent with the data selected.

This cannot be done in Time and Labor, but it can be done in Cloud Projects. So you would have to change appropriate options in Cloud Projects tofix both issues.

The “team member” issue cannot be fixed in Time and Labor; it must be fixed in Cloud Projects. Also, because the time type selected cannot be changed, you change the column name to “Project Number” so that it is consistent with the dataselected.

NEW QUESTION 41
What time card criteria canyou run with the Mass Submit and Approve Time Card process?

Date Range, Person Name, Group Name, Approver Name, Location, Department

Date Range, Person Name, Group Name, and Time Card Status

Date Range, Person Name, Person Number, Group Name, and Time Card Status, Approver Name

Date Range, Person Name, Person Number, Group Name, and Time Card Status

NEW QUESTION 42
Managers need to highlight the overtime periods while reviewing their time cards. How should you configure this?

You use personalization to enable the option.

Select the Enable option tohighlight overtime periods in the time review layout.

Select the Enable option to highlight overtime periods in the time entry layout.

No configuration needed

NEW QUESTION 43
You are managing your team schedule andyou cannot see one of your worker’s schedule. This worker has a work schedule typed as duration. What is causing this?

Duration work schedules are not supported in the Planned and Published Schedules.

The worker’s work schedule is assigned to hisprimary assignment.

Shift short name has not been set for the shifts that composed the worker’s work schedule.

Shift limits have not been set for the shifts that composed the worker’s work schedule.

NEW QUESTION 44
You need to assign a worker as a scheduler and act on a manager’s behalf. The worker should have access to scheduling groups X and Y, but not to Z.
How shouldyou set this up?

You only need to give the worker the Time and Labor Manager role

You only need to create a scheduler profile for this worker

You need to assign this worker as a scheduler to the correct scheduler profiles and give this workerthe Time and Labor Manager role

Only line managers can be schedulers

NEW QUESTION 45
What is the correct sequence of steps and new defined objects required to enable customer-defined messages as an option when defining different time card validation rules?

Define new messaged as CUST_HWM_<message name>, select the new messages when defining a TDR or TER rule, and assign the rule using a rule set and time processing profile.

Define a new Message as CUST_HWM_<message name>, select the new messages when defining a TER rule, and assign the rule using a rule set and time processing profile.

Define a new message as WFM_<message name>, select the new message when defininga TER rule, and assign the rule using a rule set and time processing profile.

Define new messages as HWM_<message name>, select the new messages when defining a TER rule, and assign the rule using a rule set and time processing profile.

NEW QUESTION 46
Which statement is true about the way the planned schedule is defaulted?

It is always defaulted with the workers’ standard working hours.

It is always defaulted with the workers’ work schedules.

It is defaulted with the workers’ availability.

All three of the above options are true.

NEW QUESTION 47
You need to create an HCM group of workers that have the same value stored in their People Group field.
Howshould you define the HCM group?

Select a delivered value set in the Group Eligibility section.

Select a specific People Group Segment in the Group Eligibility section on the page,

Select a People Group from the list of Additional Employment Attributes in the Group Eligibility section.

This cannot be done.

Define a customer-defined value set and select from the Include Group section on the page.

NEW QUESTION 48
Which process enables you to quickly identify large quantities of time cards to submit and mark as approved, atone time?

Mass Approve Time Cards Process

Mass Time Cards Status Update Process

Mass Submit Time Cards Process

Mass Submit and Approve Time cards Process

NEW QUESTION 49
The Generate time cards process is run for an HCM group called “group 1” with the “Available from date” = 1 Jan 2016 and the “Available to date” = 1 March 2016.
Which time cards will be generated?

Time cards for the primary assignment of workers who are active members of “group 1” during the available date range. Only time cards starting on or after 1 Jan 2016 and ending on or before 1 March
2016 will be created. Any existing time cards and data will not be changed.

Time cards for the primary assignment of workers who are active members of “group1” on 1 March
2016. Only time cards starting after 1 Jan 2016 and ending on or before 1 March 2016 will be created.
Any existing time cards and data willnot be changed.

Tine cards for the primary assignment of workers who are active members of “group 1” during the available date range. Only time cards starting on or after 1 Jan 2016 and ending on or before 1 March
2016 will be created. The existing timecards will be replaced.

Time cards for all assignments of workers who are active members of “group 1” during the available date range. Time cards with any date within the range 1 Jan 2016 and 1 March 2016 will be created.
Any existing time cards and data will not be changed.

Time cards for all assignments of workers who are active members of “group 1” during the available date range. Only time cards starting on or after 1 Jan 2016 and ending on or before 1 March 2016 will be created. The existing time cards will be replaced.

Time cards for the primary assignment of workers who are active members of “group 1” during the available date range. Time cards with any date within the range 1 Jan 2016 and 1 March 2016 will be created. Any existing time cards and data will not be changed.

NEW QUESTION 50
When should you execute the Time and Labor – Generate Data Dictionary Time Attributes process if you areimplementing only Oracle Project Costing?

Every day

When new projects and tasks are created for use in Time and Labor

Never; not required to run the Generate Data Dictionary Time Attributes process when implementing Oracle Project Costing

Always before accessing the Manage Time Entry Layout Components setup task

When implementing Time and Labor for the first time

NEW QUESTION 51
Which three capabilities are defined for workers in the Time Processing Profiles in Time and Labor?

rules for time card actions that control when workers can enter, update, and delete their time

time submission rule set

time card period

consumer set, validation, approval, and transfer processing

time entry and time calculation rule sets

NEW QUESTION 52
Which configuration step should you perform to display the unit of measure and quantity fields in time card matrices?

Configure time categories to display the unit of measure column for time entries.

Enable display of the unit of measure option in the time processing setup profile.

Enable display of the unit of measure option on the payroll time type attribute for the required element.

Configure layouts to display the unit of measure column for time entries.

Enable display of the unit of measure option in the time entry setup profile.

NEW QUESTION 53
How should you configure Time and Labor Approvals to route to multiple approvers so that if a Payroll Layout time card only contains regular hours, it routes to the Line Manager, but if the time card contains an absence, it can also route to an HR admin?

This is not possible.

You should use the BPM Worklist and modify the BPM task: AbsencesApprovalsTask.

You should use the BPM Worklist and modify the Payroll Time Card Approval – > BPM task:
TimecardApproval.

You should use the BPM Worklist and modify the Project Time Card Approval – > BPM task:
ProjectTimecardApproval.

You should use the BPM Worklist and modify the Payroll Time Card Approval – > BPM task:
TimecardApproval and BPM Worklist, andmodify the BPM task: AbsencesApprovalsTask.

NEW QUESTION 54
A client wants their workers to report earned compensatory time on their time cards.
Whatthree-time entry setup configuration tasks do you need to complete during implementation before workers can report compensatory time?

Manage Time Entry Layout Components

Manage Time Layout Sets

Manage Time Calculation Rules

Create an Absence Plan and enroll workers in the plan

Manage Time Consumers

NEW QUESTION 55
A rule used in the production environment is deliveringincorrect results. It was determined that the formula and template were correct, but the rule input and output parameters were not set up with the correct values.
Which option describes, at a high level, how should you resolve the issue?

Set the WFM Administrator Profile Value: HWM_ALLOW_RULE_EDITS to “Yes”. Delete the incorrect rule from the rule set. From the Manage Time Repository Rules task, select the incorrect rule and select Actions – Edit Deployed Rule. Correct the input and output values. Re-add the corrected rule to the rule set using the appropriate edit options. Resubmit the incorrect time cards.

Set the WFM Administrator Profile Value: HWM_ALLOW_RULE_EDITS to “Yes”. Edit the deployed Rule to correct the input and output values. Resubmitthe incorrect time cards.

Delete the incorrect rule from the rule set. From the Manage Time Repository Rules task, select the incorrect rule and select Actions – Edit Deployed Rule. Correct the input and output values. Re-add the corrected rule to the rule set using the appropriate edit options. Resubmit the incorrect time cards.

Duplicate the incorrect Rule, and correct input and output values in the new rule. Update the rule set using the appropriate edit options to use the new rule. Resubmit the incorrect time cards.

NEW QUESTION 56
What When executingthe Generate Time Card Fields process, that will be setting the parameter “Include Absence Types” to Yes accomplish?

enables entry of Absence Plans directly on the time entry and calendar entry layouts

updates available absence values for selection within the existing time card fields

createsa multiple-attribute time card field with only the Absence Management type time attribute

creates a multiple-attribute time card field with Absence Management type and Payroll Time type time attributes

enables Absence entries on the time entry and calendar entry layouts

none of the above

NEW QUESTION 57
Your customer wants to customize time card layouts for managers and workers, so that a manager’s layout displays and allows the override of default pay rates, but worker’s layout displays it as read-only.
Whichstatement is correct about customizing the time card layout sets?

Edit the manager layout first so that the worker layout inherits the edits, which you can then revise as required.

Manager layout doesn’t inherit any worker layout edits.

Edit theworker layout first so that the manager layout inherits the edits, which you can then revise as required.

The worker layout automatically inherits any manager layout edits.

NEW QUESTION 58
You need a Time EntryRule to run only when one or more of a certain group of Time Attribute values have been entered in the time card.
How should you achieve this?

Define a Time Category that will evaluate to True when the condition for executing the rule has been met anduse this in the Time Entry Rule formula to define when the rule will run.

Define an HCM Group that contains the required time attribute values and use this in the Time Entry Rule formula to define when the rule will run.

Define a Time Category thatwill evaluate to True when the condition for executing the rule has been met and use this in the Time Entry Rule set to define when the rule will run.

Define a Time Category that will evaluate to True when the condition for executing the rule has been met and use this in the Time Entry Rule Template to define when the rule will run.

Define an HCM Group that contains the required time attribute values and use this in the Time Entry Rule set to define when the rule will run.