Check the Free demo of our PD1-001 Exam Dumps with 861 Questions [Q205-Q221] – IT Certification Exam Questions & Answers

Rate this post

Check the Free demo of our PD1-001 Exam Dumps with 861 Questions

Clear your concepts with PD1-001 Questions Before Attempting Real exam

NO.205 When measuring ohms using a multimeter a technician is measuring which of the following?

Capacitance

Current

Voltage

Resistance

NO.206 Which of the following parts would open and close a junction gate in a finishing device? (Select TWO).

Solenoid

Clutch

Stepper Motor

AC/DC Motor

Cams

NO.207 A clients Laser/LED printer is producing output with dark areas on the page from lead to trail edge.
Which of the following are the MOST likely causes of this kind of print flaw? (Select TWO).

Faulty HVPS

Faulty photoconductor

Faulty paper input unit

Faulty laser emitter

Faulty fuser assembly

NO.208 A customer with a static IP address on their computer can print first thing in the morning, but when a coworker turns on their computer, printing becomes intermittent or does not print at all. Which of the following is the cause of the problem?

The print drivers are setup to use the same IP address for the printer.

The coworkers computer is using the wrong driver.

DHCP is not setup correctly.

The printer has the same IP address as a coworkers computer.

NO.209 Which of the fol owing processes utilizes heat and pressure to permanently embed the toner image into the paper?

Development

Fusing

Charging

Cleaning

NO.210 A customer states that every time they try to print a particular document, it prints part of the page and then locks up the spooler. Which of the following is the MOST likely reason for this issue?

The document is too large for the memory

A defective network interface card

A defective data cable

A defective laser unit

NO.211 An ink dispersion printer is brought in for service. The customer is having a problem with the quality of the output. The pictures printed are stil wet and will smear when they are touched. Which of the following should the technician do FIRST?

Check the fuser pressure.

Verify specifications of photo media.

Replace the print head.

Replace the logic PCB.

NO.212 A customer wants to edit text from an original scanned image, which of the following should a technician recommend?

Install an OCR program.

Install a WYSIWYG program.

Scan using the TIFF format and then edit the text.

Scan using the PDF format and then edit the text.

NO.213 A uniform charge is supplied to the photoconductor surface by a charge:

brush.

corona.

lamp.

LED.

NO.214 Which of the following command prompts wil provide the IP address and subnet mask of a laptop network adapter?

PING

NSLOOKUP

DHCP

IPCONFIG

NO.215 A technician turns on the ink dispersion device and notices that there is a noise coming from the purge unit. After a closer visual inspection of the purge unit the technician notices that it is not moving. Which of the following troubleshooting methodologies steps was used in this scenario?

Establish theory

Observation

Implement solution

Test or analyze

NO.216 A client is printing a document they have received from one of their vendors on a LAN printing device. The document prints in landscape even though the printer is hard set to portrait mode and other documents print portrait. Which of the following could be the problem?

The print queue is set to landscape as default.

The page setup associated with the document in the application is set to landscape.

The print driver on their system is defaulting to landscape mode for that particular application.

The printers local defaults are set to landscape mode.

NO.217 A technician is attempting to connect their laptop to a networked MFP device to prove connectivity.
Which of the following cable types must be used?

Crossover

ThinNet

RJ-11

RS-232

NO.218 The client reports they cannot fax to one particular location. Al other locations work fine. The activity report confirms this. Which of the following is the next BEST step?

Try sending to it again this time with several pages.

Use a telephone to call the number in question and listen to the line.

Reboot the fax machine and then try again.

Insert the paper in the ADF face up to ensure the image is captured.

NO.219 A customer is printing to their MFD and the output is coming out on a printer in another room.
Which of the following is the MOST likely cause of this issue?

Port settings

Default settings

Gateway address

Print driver version

NO.220 Which of the following is a connector type for connecting telephone lines to fax/modems?

STP

RJ-45

RJ-11

CAT-5

NO.221 Which of the following is the FIRST stage in the image capture process?

Light exposure

Filter