[Q12-Q26] Easily To Pass New NSE7_PBC-6.4 Premium Exam Updated [Jul 01, 2023] – IT Certification Exam Questions & Answers

Rate this post

Easily To Pass New NSE7_PBC-6.4 Premium Exam Updated [Jul 01, 2023]

NSE7_PBC-6.4 Certification All-in-One Exam Guide Jul-2023

Fortinet NSE7_PBC-6.4 (Fortinet NSE 7 – Public Cloud Security 6.4) Certification Exam is a valuable credential for IT professionals who are responsible for managing security in public cloud environments. NSE7_PBC-6.4 exam covers a wide range of topics related to public cloud security and validates the knowledge and skills required to design, implement, and manage security solutions for public cloud environments. Fortinet NSE 7 – Public Cloud Security 6.4 certification is recognized globally and provides opportunities for career advancement and increased earning potential.

Q12. You are deploying Amazon Web Services (AWS) GuardDuty to monitor malicious or unauthorized behaviors related to AWS resources. You will also use the Fortinet aws-lambda-guardduty script to translate feeds from AWS GuardDuty findings into a list of malicious IP addresses. FortiGate can then consume this list as an external threat feed.
Which Amazon AWS services must you subscribe to in order to use this feature?

GuardDuty, CloudWatch, S3, Inspector, WAF, and Shield.

GuardDuty, CloudWatch, S3, and DynamoDB.

Inspector, Shield, GuardDuty, S3, and DynamoDB.

WAF, Shield, GuardDuty, S3, and DynamoDB.

Q13. Refer to the exhibit.

You attempted to deploy the FortiGate-VM in Microsoft Azure with the JSON template, and it failed to boot up. The exhibit shows an excerpt from the JSON template.
What is incorrect with the template?

The LUN ID is not defined.

FortiGate-VM does not support managedDisk from Azure.

The caching parameter should be None.

The CreateOptions parameter should be FromImage.

Q14. What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

Up to 1.25 Gbps per attachment

Up to 50 Gbps per attachment

Up to 10 Gbps per attachment

Up to 1 Gbps per attachment

Q15. When configuring the FortiCASB policy, which three configuration options are available? (Choose three.)

Intrusion prevention policies

Threat protection policies

Data loss prevention policies

Compliance policies

Antivirus policies

Q16. Which two statements about Amazon Web Services (AWS) networking are correct? (Choose two.)

Proxy ARP entries are disregarded.

802.1q VLAN tags are allowed inside the same virtual private cloud.

AWS DNS reserves the first host IP address of each subnet.

Multicast traffic is not allowed.

Q17.

Refer to the exhibit. Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)

Implement the FortiGate-VM network virtual appliance (NVA) in the hub and use user-defined routes (UDRs) in the spokes.

Use ExpressRoute to interconnect the hub VNets and spoke VNets.

Configure VNet peering between the spokes only.

Configure VNet peering between the hub and spokes.

Q18. An organization deployed a FortiGate-VM in the Google Cloud Platform and initially configured it with two vNICs. Now, the same organization wants to add additional vNICs to this existing FortiGate-VM to support different workloads in their environment.
How can they do this?

They can create additional vNICs using the Cloud Shell.

They cannot create and add additional vNICs to an existing FortiGate-VM.

They can create additional vNICs in the UI console.

They can use the Compute Engine API Explorer.

Explanation/Reference: https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/62d32ecf-687f-11ea-
9384-00505692583a/FortiOS-6.4-GCP_Cookbook.pdf

Q19. Refer to the exhibit.

A customer has deployed an environment in Amazon Web Services (AWS) and is now trying to send outbound traffic from the Web servers to the Internet. The FortiGate policies are configured to allow all outbound traffic; however, the traffic is not reaching the FortiGate internal interface.
What are two possible reasons for this behavior? (Choose two.)

The web servers are not configured with the default gateway.

The Internet gateway (IGW) is not added to VPC (virtual private cloud).

AWS source and destination checks are enabled on the FortiGate interfaces.

AWS security groups may be blocking the traffic.

Explanation
You need to check if source/destination are enabled. Public_Cloud_6.4_Study_Guide Page 67

Q20. Refer to the exhibit.

You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On-demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.
What caused the validation process to fail?

You selected the incorrect resource group.

You selected the Bring Your Own License (BYOL) licensing mode.

You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.

You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.

Explanation
https://docs.microsoft.com/en-us/azure/cloud-adoption-framework/ready/azure-setup-guide/organize-resources

Q21. Which two Amazon Web Services (AWS) topologies support east-west traffic inspection within the AWS cloud by the FortiGate VM? (Choose two.)

A single VPC deployment with multiple subnets and a NAT gateway

A single VPC deployment with multiple subnets

A multiple VPC deployment utilizing a transit VPC topology

A multiple VPC deployment utilizing a transit gateway

Q22. What is the bandwidth limitation of an Amazon Web Services (AWS) transit gateway VPC attachment?

Up to 1.25 Gbps per attachment

Up to 50 Gbps per attachment

Up to 10 Gbps per attachment

Up to 1 Gbps per attachment

Explanation/Reference: https://d1.awsstatic.com/whitepapers/building-a-scalable-and-secure-multi-vpc-aws-network- infrastructure.pdf (5)

Q23.

Refer to the exhibit. Consider an active-passive HA deployment in Microsoft Azure. The exhibit shows an excerpt from the passive FortiGate-VM node.
If the active FortiGate-VM fails, what are the results of the API calls made by the FortiGate named SSTENTAZFGT-0302? (Choose two.)

SSTENTAZFGT-03-FloatingPIP is assigned to the IP configuration with the name SSTENTAZFGT-
0302-Nic-01, under the network interface SSTENTAZFGT-0302-Nic-01

172.29.32.71is set as a next hop IP for all routes under FortigateUDR-01

The network interface of the active unit moves to itself

SSTENTAZFGT-03-FloatingPIP public IP is assigned to NIC SSTENTAZFGT-0302-Nic-01

Q24. You have previously deployed an Amazon Web Services (AWS) transit virtual private cloud (VPC) with a pair of FortiGate firewalls (VM04 / c4.xlarge) as your security perimeter. You are beginning to see high CPU usage on the FortiGate instances.
Which action will fix this issue?

Convert the c4.xlarge instances to m4.xlarge instances.

Migrate the transit VPNs to new and larger instances (VM08 / c4.2xlarge).

Convert from IPsec tunnels to generic routing encapsulation (GRE) tunnels, for the VPC peering connections.

Convert the transit VPC firewalls into an auto-scaling group and launch additional EC2 instances in that group.

Q25. Refer to the exhibit.

Which two conditions will enable you to segregate and secure the traffic between the hub and the spokes in Microsoft Azure? (Choose two.)