Free Fortinet NSE8_812 Study Guides Exam Questions & Answer [Q64-Q86] – IT Certification Exam Questions & Answers

Rate this post

Free Fortinet NSE8_812 Study Guides Exam Questions and Answer

NSE8_812 Exam Dumps, NSE8_812 Practice Test Questions

Fortinet NSE8_812 exam is a written exam that is designed to test the expertise of individuals in the area of network security. NSE8_812 exam is part of the Fortinet Network Security Expert (NSE) program, which is a multi-level certification program that provides individuals with the knowledge and skills required to design, configure, and manage complex network security solutions.

Fortinet NSE8_812 Exam Syllabus Topics:

Topic	Details
Topic 1	Security Architecture: This topic focuses on FortiGate Network Security products and their role in safeguarding enterprise environments. It also explores Fortinet Security Fabric Solution deployments and high-availability solutions to ensure reliability.
Topic 2	Secure SD-WAN: This topic equips Fortinet networking and security experts with knowledge of SD-WAN advanced architecture and design, enabling robust implementation strategies. Advanced features, including dynamic path selection and SLA monitoring, are explored, alongside troubleshooting methodologies for resolving complex SD-WAN issues effectively.
Topic 3	Automation: Networking and security professionals will learn about Fortinet automation tools, such as automated workflows and task optimizations. This topic highlights built-in scripting capabilities and effective API configurations for enhanced operational efficiency.
Topic 4	Networking: This section examines advanced routing and networking technologies, focusing on seamless data flow across complex networks. It covers VPN design methodologies for secure communication, advanced Fortinet access configurations, and their integration. Additionally, application delivery techniques essential for optimal network performance are addressed.

Fortinet NSE8_812 certification is highly regarded in the network security industry. It is recognized by IT professionals, employers, and customers as a mark of excellence in network security expertise. Fortinet NSE 8 – Written Exam (NSE8_812) certification demonstrates that the holder has a thorough understanding of network security principles and can apply that knowledge to design, implement, and manage complex security solutions. Fortinet NSE 8 – Written Exam (NSE8_812) certification can help network security professionals advance their careers, increase their earning potential, and gain recognition for their expertise.

NO.64 Refer to the exhibit.

The exhibit shows the forensics analysis of an event detected by the FortiEDR core In this scenario, which statement is correct regarding the threat?

This is an exfiltration attack and has been stopped by FortiEDR.

This is an exfiltration attack and has not been stopped by FortiEDR

This is a ransomware attack and has not been stopped by FortiEDR.

This is a ransomware attack and has been stopped by FortiEDR

NO.65 Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration.
Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

NO.66 Refer to the exhibits, which show a network topology and VPN configuration.

A network administrator has been tasked with modifying the existing dial-up IPsec VPN infrastructure to detect the path quality to the remote endpoints.
After applying the configuration shown in the configuration exhibit, the VPN clients can still connect and access the protected 172.16.205.0/24 network, but no SLA information shows up for the client tunnels when issuing the diagnose sys link-monitor tunnel all command on the FortiGate CLI.
What is wrong with the configuration?

SLA link monitoring does not work with the net-device setting.

The admin needs to disable the mode-cfg setting.

IPsec Phase1 Interface has to be configured in IPsec main mode.

It is necessary to use the IKEv2 protocol in this situation.

NO.67 A retail customer with a FortiADC HA cluster load balancing five webservers in L7 Full NAT mode is receiving reports of users not able to access their website during a sale event. But for clients that were able to connect, the website works fine.
CPU usage on the FortiADC and the web servers is low, application and database servers are still able to handle more traffic, and the bandwidth utilization is under 30%.
Which two options can resolve this situation? (Choose two.)

Change the persistence rule to LB_PERSIS_SSL_SESSJD.

Add more web servers to the real server poof

Disable SSL between the FortiADC and the web servers

Add a connection-pool to the FortiADC virtual server

NO.68 Refer to the exhibits.
Exhibit A

Exhibit B

Exhibit C

A customer is trying to set up a VPN with a FortiGate, but they do not have a backup of the configuration.
Output during a troubleshooting session is shown in the exhibits A and B and a baseline VPN configuration is shown in Exhibit C Referring to the exhibits, which configuration will restore VPN connectivity?

NO.69 Refer to the exhibits.

The exhibits show a diagram of a requested topology and the base IPsec configuration.
A customer asks you to configure ADVPN via two internet underlays. The requirement is that you use one interface with a single IP address on DC FortiGate.
In this scenario, which feature should be implemented to achieve this requirement?

Use network-overlay id

Change advpn2 to IKEv1

Use local-id

Use peer-id

NO.70 Refer to the exhibits.

A customer wants to deploy 12 FortiAP 431F devices on high density conference center, but they do not currently have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy From the FortiSwitch models and sample retail prices shown in the exhibit, which build of materials would have the lowest cost, while fulfilling the customer’s requirements?

1x FortiSwitch 248EFPOE

2x FortiSwitch 224E-POE

2x FortiSwitch 248E-FPOE

2x FortiSwitch 124E-FPOE

The customer wants to deploy 12 FortiAP 431F devices on a high density conference center, but they do not have any PoE switches to connect them to. They want to be able to run them at full power while having network redundancy. PoE switches are switches that can provide both data and power to connected devices over Ethernet cables, eliminating the need for separate power adapters or outlets. PoE switches are useful for deploying devices such as wireless access points, IP cameras, and VoIP phones in locations where power outlets are scarce or inconvenient. The FortiAP 431F is a wireless access point that supports PoE+ (IEEE 802.3at) standard, which can deliver up to 30W of power per port. The FortiAP 431F has a maximum power consumption of 25W when running at full power. Therefore, to run 12 FortiAP 431F devices at full power, the customer needs PoE switches that can provide at least 300W of total PoE power budget (25W x 12). The customer also needs network redundancy, which means that they need at least two PoE switches to connect the FortiAP devices in case one switch fails or loses power. From the FortiSwitch models and sample retail prices shown in the exhibit, the build of materials that has the lowest cost while fulfilling the customer’s requirements is 2x FortiSwitch 248E-FPOE. The FortiSwitch 248E-FPOE is a PoE switch that has 48 GE ports with PoE+ capability and a total PoE power budget of 370W. It also has 4x 10 GE SFP+ uplink ports for high-speed connectivity. The sample retail price of the FortiSwitch 248E-FPOE is $1,995, which means that two units will cost $3,990. This is the lowest cost among the other options that can meet the customer’s requirements. Option A is incorrect because the FortiSwitch 248EFPOE is a non-PoE switch that has no PoE capability or power budget. It cannot provide power to the FortiAP devices over Ethernet cables. Option B is incorrect because the FortiSwitch 224E-POE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. Option D is incorrect because the FortiSwitch 124E-FPOE is a PoE switch that has only 24 GE ports with PoE+ capability and a total PoE power budget of 185W. It cannot provide enough ports or power to run 12 FortiAP devices at full power. References: https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiSwitch_Secure_Access_Series.pdf https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/FortiAP_400_Series.pdf

NO.71 Refer to The exhibit, which shows a topology diagram.

A customer wants to use SD-WAN for traffic generated from the data center towards Branches. SD-WAN on HUB should follow the underlay condition on each Branch and the solution should be scalable for hundreds of Branches.
Which SD WAN-Rules strategy should be used?

Manual based on route-tags

Lowest Cost SLA

Auto based on link quality

Best Quality based on route-tags

NO.72 Refer to the exhibit.

Given the exhibit, which two statements about FortiGate FGSP HA cluster behavior are correct? (Choose two.)

You can run FortiGate Virtual Router Redundancy Protocol (VRRP) high availability in addition to FGSP simultaneously.

Session synchronization occurs over Layer 3 by default, and if unavailable it will then try Layer 2.

You can selectively synchronize only specific sessions between FGSP cluster members.

Cluster members will upgrade one at a time and failover during firmware upgrades.

NO.73 Refer to the exhibit showing FortiGate configurations

FortiManager VM high availability (HA) is not functioning as expected after being added to an existing deployment.
The administrator finds that VRRP HA mode is selected, but primary and secondary roles are greyed out in the GUI The managed devices never show online when FMG-B becomes primary, but they will show online whenever the FMG-A becomes primary.
What change will correct HA functionality in this scenario?

Change the FortiManager IP address on the managed FortiGate to 10.3.106.65.

Make the monitored IP to match on both FortiManager devices.

Unset the primary and secondary roles in the FortiManager CLI configuration so VRRP will decide who is primary.

Change the priority of FMG-A to be numerically lower for higher preference

NO.74 Refer to the exhibit.

To facilitate a large-scale deployment of SD-WAN/ADVPN with FortiGate devices, you are tasked with configuring the FortiGate devices to support injecting of IKE routes on the ADVPN shortcut tunnels.
Which three commands must be added or changed to the FortiGate spoke config vpn ipsec phasei-interface options referenced in the exhibit for the VPN interface to enable this capability? (Choose three.)

set net-device disable

set mode-cfg enable

set ike-version 1

set add-route enable

set mode-cfg-allow-client-selector enable

NO.75 Refer to the exhibit.

To facilitate a large-scale deployment of SD-WAN/ADVPN with FortiGate devices, you are tasked with configuring the FortiGate devices to support injecting of IKE routes on the ADVPN shortcut tunnels.
Which three commands must be added or changed to the FortiGate spoke config vpn ipsec phasei-interface options referenced in the exhibit for the VPN interface to enable this capability? (Choose three.)

set net-device disable

set mode-cfg enable

set ike-version 1

set add-route enable

set mode-cfg-allow-client-selector enable

NO.76 An HA topology is using the following configuration:

Based on this configuration, how long will it take for a failover to be detected by the secondary cluster member?

600ms

200ms

300ms

100ms

NO.77 You must configure an environment with dual-homed servers connected to a pair of FortiSwitch units using an MCLAG.
Multicast traffic is expected in this environment, and you should ensure unnecessary traffic is pruned from links that do not have a multicast listener.
In which two ways must you configure the igmps-f lood-traffic and igmps-flood-report settings? (Choose two.)

enable on the ISL and FortiLink trunks

enable on ICL trunks

disable on ICL trunks

disable on the ISL and FortiLink trunks

NO.78 What is the benefit of using FortiGate NAC LAN Segments?

It provides support for multiple DHCP servers within the same VLAN.

It provides physical isolation without changing the IP address of hosts.

It provides support for IGMP snooping between hosts within the same VLAN

It allows for assignment of dynamic address objects matching NAC policy.

NO.79 Which two methods are supported for importing user defined Lookup Table Data into the FortiSIEM? (Choose two.)

Report

FTP

API

SCP

NO.80 You must configure an environment with dual-homed servers connected to a pair of FortiSwitch units using an MCLAG.
Multicast traffic is expected in this environment, and you should ensure unnecessary traffic is pruned from links that do not have a multicast listener.
In which two ways must you configure the igmps-f lood-traffic and igmps-flood-report settings? (Choose two.)

disable on ICL trunks

enable on ICL trunks

disable on the ISL and FortiLink trunks

enable on the ISL and FortiLink trunks

NO.81 Refer to the exhibit.

You are deploying a FortiGate 6000F. The device should be directly connected to a switch. In the future, a new hardware module providing higher speed will be installed in the switch, and the connection to the FortiGate must be moved to this higher-speed port.
You must ensure that the initial FortiGate interface connected to the switch does not affect any other port when the new module is installed and the new port speed is defined.
How should the initial connection be made?

Connect the switch on any interface between ports 21 to 24

Connect the switch on any interface between ports 25 to 28

Connect the switch on any interface between ports 1 to 4

Connect the switch on any interface between ports 5 to 8.

NO.82 An administrator has configured a FortiGate device to authenticate SSL VPN users using digital certificates.
A FortiAuthenticator is the certificate authority (CA) and the Online Certificate Status Protocol (OCSP) server.
Part of the FortiGate configuration is shown below:

Based on this configuration, which two statements are true? (Choose two.)

OCSP checks will always go to the configured FortiAuthenticator

The OCSP check of the certificate can be combined with a certificate revocation list.

OCSP certificate responses are never cached by the FortiGate.

If the OCSP server is unreachable, authentication will succeed if the certificate matches the CA.

NO.83 Refer to the exhibit, which shows a VPN topology.

The device IP 10.1.100.40 downloads a file from the FTP server IP 192.168.4.50 Referring to the exhibit, what will be the traffic flow behavior if ADVPN is configured in this environment?

All the session traffic will pass through the Hub

The TCP port 21 must be allowed on the NAT Device2

ADVPN is not supported when spokes are behind NAT

Spoke1 will establish an ADVPN shortcut to Spoke2

NO.84 Refer to the exhibits.

A customer has deployed a FortiGate with iBGP and eBGP routing enabled. HQ is receiving routes over eBGP from ISP 2; however, only certain routes are showing up in the routing table-Assume that BGP is working perfectly and that the only possible modifications to the routing table are solely due to the prefix list that is applied on HQ.
Given the exhibits, which two routes will be active in the routing table on the HQ firewall? (Choose two.)

172.16.204.128/25

172.16.201.96/29

172,620,64,27

172.16.204.64/27

NO.85 Refer to the exhibit.

A customer has deployed a FortiGate 300E with virtual domains (VDOMs) enabled in the multi-VDOM mode. There are three VDOMs: Root is for management and internet access, while VDOM 1 and VDOM 2 are used for segregating internal traffic. AccountVInk and SalesVInk are standard VDOM links in Ethernet mode.
Given the exhibit, which two statements below about VDOM behavior are correct? (Choose two.)

You can apply OSPF routing on the VDOM link in either PPP or Ethernet mode

Traffic on AccountVInk and SalesVInk will not be accelerated.

The VDOM links are in Ethernet mode because they have IP addressed assigned on both sides.

Root VDOM is an Admin type VDOM, while VDOM 1 and VDOM 2 are Traffic type VDOMs.

OSPF routing can be configured between VDOM 1 and Root VDOM without any configuration changes to AccountVInk

NO.86 Refer to the exhibit.

You have been tasked with replacing the managed switch Forti Switch 2 shown in the topology.
Which two actions are correct regarding the replacement process? (Choose two.)

After replacing the FortiSwitch unit, the automatically created trunk name does not change

CLAG-ICL needs to be manually reconfigured once the new switch is connected to the FortiGate

After replacing the FortiSwitch unit, the automatically created trunk name changes.

MCLAG-ICL will be automatically reconfigured once the new switch is connected to the FortiGate.

Latest NSE8_812 Actual Free Exam Questions Updated 107 Questions: https://www.it-tests.com/NSE8_812.html

Tags: NSE8_812 authorized pdf, NSE8_812 flexible learning mode, NSE8_812 reliable exam review, NSE8_812 valid test guide

IT Certification Exam Questions & Answers

Fortinet NSE8_812 Exam Syllabus Topics:

Leave a Reply Cancel reply